baoyuan

搜索

baoyuan

新闻中心
NEWS CENTER
Add：
Homepage
-
News
-
Company News
-
What are the main wear parts of the conveyor belt

What are the main wear parts of the conveyor belt

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-11-12
  • Views:0

What are the main wear parts of the conveyor belt

(Summary description)When the conveyor belt is in use, friction will occur with rollers, conveyors, material ports, etc. The greater the friction, the greater the damage to the conveyor belt. To reduce the wear of the conveyor belt, it is necessary to understand the main friction parts of the conveyor belt. The main friction parts of the conveyor belt are described below.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2020-11-12
  • Views:0
Information

When the conveyor belt is in use, friction will occur with rollers, conveyors, material ports, etc. The greater the friction, the greater the damage to the conveyor belt. To reduce the wear of the conveyor belt, it is necessary to understand the main friction parts of the conveyor belt. The main friction parts of the conveyor belt are described below.

Scan the QR code to read on your phone

Previous: Factors that determine the service life of the conveyor belt
Next: What should I do if the conveyor belt slips?
Previous: Factors that determine the service life of the conveyor belt
Next: What should I do if the conveyor belt slips?

Related information

What are the main issues in conveyor belt operation?
What
What are the main issues in conveyor belt operation?
2020-11-12
The temperature of the material being conveyed by the support roller is generally less than 60℃. The length and assembly form of the machine can be determined according to user requirements. The transmission can be electric rollers or a drive device with a drive frame. Conveyor belts for materials with high operability and unloading devices using fixed pears should be as low as possible. Conveyor belts are rubber, fiber, metal composite products, or plastic (structure: synthetic resin, plasticizer, stabilizer, pigment) and fabric composite products used in belt conveyor belts to carry and transport materials.
See more information
The temperature of the material being conveyed by the support roller is generally less than 60℃. The length and assembly form of the machine can be determined according to user requirements. The transmission can be electric rollers or a drive device with a drive frame. Conveyor belts for materials with high operability and unloading devices using fixed pears should be as low as possible. Conveyor belts are rubber, fiber, metal composite products, or plastic (structure: synthetic resin, plasticizer, stabilizer, pigment) and fabric composite products used in belt conveyor belts to carry and transport materials.
Reasons for the side ditch of the conveyor belt
Reasons
Reasons for the side ditch of the conveyor belt
2020-11-12
What are the reasons for the side ditch of the conveyor belt? Hope our introduction can help you better. The temperature of the material being conveyed by the support roller is generally less than 60℃. The length and assembly form of the machine can be determined according to user requirements, and the drive can be electric rollers or drive devices with drive frames. Nylon (PA) conveyor belt Nylon core conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good performance, high interlayer adhesion strength (strength), excellent flexibility and long service life. It is suitable for medium and long distances, Convey materials under high load and high speed conditions. Nylon conveyor belt not only has these advantages, the main thing is that it is fast and convenient, which greatly improves work efficiency and work integrity. The mid-layer canvas of the nylon conveyor belt is nylon canvas. The key equipment (shèbèi) on nylon that directly contacts the conveying material. There was a problem with the conveyor belt. It will directly affect the life of the conveyor. The following introduces a common problem of conveyor belts. Conveyor belt side ditch There are many problems in the use of conveyor belts, such as side ditch on the conveyor belt, which is a very common problem. This seriously affected the problems of the conveyor belt. The problem of side ditch is generally caused by two problems, one is the formula; the other is the process
See more information
What are the reasons for the side ditch of the conveyor belt? Hope our introduction can help you better. The temperature of the material being conveyed by the support roller is generally less than 60℃. The length and assembly form of the machine can be determined according to user requirements, and the drive can be electric rollers or drive devices with drive frames. Nylon (PA) conveyor belt Nylon core conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good performance, high interlayer adhesion strength (strength), excellent flexibility and long service life. It is suitable for medium and long distances, Convey materials under high load and high speed conditions. Nylon conveyor belt not only has these advantages, the main thing is that it is fast and convenient, which greatly improves work efficiency and work integrity. The mid-layer canvas of the nylon conveyor belt is nylon canvas. The key equipment (shèbèi) on nylon that directly contacts the conveying material. There was a problem with the conveyor belt. It will directly affect the life of the conveyor. The following introduces a common problem of conveyor belts. Conveyor belt side ditch There are many problems in the use of conveyor belts, such as side ditch on the conveyor belt, which is a very common problem. This seriously affected the problems of the conveyor belt. The problem of side ditch is generally caused by two problems, one is the formula; the other is the process
Factors that determine the service life of the conveyor belt
Factors
Factors that determine the service life of the conveyor belt
2020-11-12
When the conveyor belt bypasses the drum, bending stress is generated, which causes the core fatigue. The smaller the diameter, the greater the bending stress. Obviously, the diameter of the roller is beneficial to increase the length of time the conveyor belt is used. However, after reaching a certain value, the bending stress is not significantly reduced, and it will also increase the volume of the equipment (shèbèi). Therefore, in order to ensure that the bending stress of the conveyor belt is not too large, the small diameter of the roller should be restricted. The principle of selecting the diameter D of the driving drum is: when the multi-layer core conveyor belt adopts mechanical joints, D≥100i, mm (i is the number of canvas layers); when vulcanized joints are used, the joints are trapezoidal lap joints, which are easy to be under bending stress. Peeling, so D≥125i, mm. When the whole braided core conveyor belt uses mechanical joints, D≥K8, mm (k depends on the parameter of the core frame material; 8 is the core thickness, mm). When steel cord conveyor belt is used, D=(150～200)(t, mm (d is the diameter of steel wire rope, mm). The diameter of the reversing drum is based on the driving drum diameter, the force percentage and the angle of the conveyor belt to the drum. determine.
See more information
When the conveyor belt bypasses the drum, bending stress is generated, which causes the core fatigue. The smaller the diameter, the greater the bending stress. Obviously, the diameter of the roller is beneficial to increase the length of time the conveyor belt is used. However, after reaching a certain value, the bending stress is not significantly reduced, and it will also increase the volume of the equipment (shèbèi). Therefore, in order to ensure that the bending stress of the conveyor belt is not too large, the small diameter of the roller should be restricted. The principle of selecting the diameter D of the driving drum is: when the multi-layer core conveyor belt adopts mechanical joints, D≥100i, mm (i is the number of canvas layers); when vulcanized joints are used, the joints are trapezoidal lap joints, which are easy to be under bending stress. Peeling, so D≥125i, mm. When the whole braided core conveyor belt uses mechanical joints, D≥K8, mm (k depends on the parameter of the core frame material; 8 is the core thickness, mm). When steel cord conveyor belt is used, D=(150～200)(t, mm (d is the diameter of steel wire rope, mm). The diameter of the reversing drum is based on the driving drum diameter, the force percentage and the angle of the conveyor belt to the drum. determine.
search
1

Copyright © Zhejiang Tiantie Tape Co., Ltd

浙ICP备15040180号

www.300.cn  taizhou